kitchen appliance 7mm tempered glass with metal housing gold colour full brass burner(2*135mm+1*60mm) and gold metal knob built in gas hob gas cooker gas stove RDX-GH050
kitchen appliance 7mm tempered glass with metal housing gold colour full brass burner(2*135mm+1*60mm) and gold metal knob built in gas hob gas cooker gas stove RDX-GH050
We are a factory offering kitchen appliance RDX-GH050 with 7mm tempered glass, gold metal housing, and full brass burner. Our gas hob gas cooker gas stove is equipped with 2*135mm+1*60mm burners and gold metal knob.
7mm Tempered Galss with gold metal housing, customised logo is available on the glass.
2
Panel Size:
750*430MM
3
Bottom Body:
Galvanized
4
Left and Right Burner:
135MM full brass burner. 4.5Kw
5
Middle Burner
Chinese SABAF Burner with gold colour 3# 75MM. 1.75Kw.
6
Pan Support:
Square Cast Iron with fire board.
7
Water Tray:
Square SS
8
Ignition:
Battery 1 x 1.5V DC with FFD
9
Gas Pipe:
Aluminum Gas pipe, Rotary connector.
10
Knob:
Metal with gold colour
11
Packing:
Brown box, with left+right+upper foam protection.
12
Gas Type:
LPG or NG.
13
Product Size:
750*430MM
14
Carton Size:
800*480*200MM
15
Cutout Size:
650*350MM
16
Loading QTY:
430PCS/20GP, 1020PCS/40HQ
Chinese SABAF Burner with gold colour 3# 75MM. 1.75Kw.
7mm Tempered Galss with gold metal housing & gold Metal knob
135MM full brass burner. 4.5Kw with FFD
Do you know why you should choose pure copper as the burner of gas cooker? At present, the materials of the gas stove distributor (distributor cover) on the market mainly include iron, alloy, ferritic copper and pure copper. Different materials have different qualities and use effects. Someone may ask whether a distributor has such a great influence on the gas stove? Not to mention, the use of the poor quality flame splitter is greatly affected. For example, the iron flame splitter will soon rust due to the corrosion of high-temperature oxidized oil and salt after being used for a period of time The rust and residue of the flame splitter will easily block the vent hole after rusting, which will cause the flame to turn yellow and burn the bottom of the black pan. In addition, if the iron material is too thin, it will be more serious. The flame splitter will rot through the big hole soon after burning. It is not easy to find the same one in the market. However, the pure copper flame splitter generally does not need to worry about being burnt out. The pure copper is resistant to high temperature and is not afraid of rust. The vent hole is not easy to block and deform. If the flame turns yellow after a period of use, use an iron needle or the like to poke the vent hole, clean up the residue or slowly adjust the lower intake air valve by looking at the flame, and adjust it to the left or right to make the flame blue.